Matt JohantgenOct 3, 20233 min readLens Design Process with Zemax: Optimization Part 1In our last post “Selection of a Starting Point Part II” we showed how to take the starting point lens design and modify it to make it...
Matt JohantgenSep 13, 20235 min readLens Design Process with Zemax: Selection of a Starting Point Part II: In our last post Selection of a Starting Point Part I we walked through how the optical engineer selects a lens type using the...
Matt JohantgenAug 30, 20233 min readLens Design Process with Zemax: Selection of a Starting PointPart 1 Once the specifications have been decided the optical engineer can begin the design. In this post we will be using the...
Matt JohantgenAug 11, 20232 min readLens Design Process with Zemax: Defining Lens SpecificationsThis is the second post in the series "Lens Design Process with Zemax". To view the first post click here. The lens design process starts...
Matt JohantgenAug 3, 20232 min readLens Design Process with Zemax: OverviewThis is the first of a series of posts on the lens design process we utilize at Optica for all of our lens designs. This process has been...